Interior panels used in electrical enclosures are installed by various means, which range from simple hex nuts with washers to special brackets and hardware. FabTech offers this hardware as individual parts, which can be used for factory installation or as kits, that can be shipped with the panels or enclosures. Our hardware paks are generically labeled for use without remarking or can be brand labeled if desired.
Back-mounted panels for “NEMA” style enclosures require 3/8–16 nuts and washers. You can save time and money by using our 3/8–16 Serrated Flange Nuts which require no washer.
A 10–32 Pan Head or Truss Head Screw is normally used, ranging in length from 1/4″ to 3/8″.
| Product No. | Thread | Material | Finish | Notes |
| FS-207004 | 3/8–16 | 18-8 Sterling Silver | Bright | Serrated Flange |
| FS-227004 | 3/8–16 | Steel | Yellow Plate | Serrated Flange |
| FS-237004 | 3/8–16 | Steel | Clear Plate | Serrated Flange |
| FS-237000 | Nut 3/8–16 | Steel | Yellow Plate | Hex |
| Product No. | Thread | Material | Finish | Notes |
| FS-336000 | 5/16 | Steel | Yellow Plate | Flat |
| FS-307000 | 3/8 | 18-8 Sterling Silver | Bright | Flat |
| FS-337000 | 3/8 | Steel | Yellow Plate | Flat |
| Product No. | Thread | Material | Finish | Notes |
| FS-133070 | 10–32 x 3/8 | Steel | Yellow Plate | Slotted Pan Head |
| FS-123070 | 10–32 x 3/8 | Steel | Clear Plate | Slotted Pan Head |
| FS-123052 | 10–32 x 1/4 | Steel | Clear Plate | Slotted Truss Head |
| FS-103070 | 10–32 x 3/8 | 18-8 Stainless Steel | Bright | Slotted Pan Head |
| Product No. | Thread | Material | Finish | Notes |
| FS-136201 | 5/16–18 x 1 | Steel | Yellow Plate | Hex Head |
| FS-107102 | 3/8–16 x 1/2 | 18–8 Stainless Steel | Bright | Truss Head |
