These rod guides are used in conjunction with 3 point latching systems where there is a desire or need for an adjustable rod guide. The rod guide bolts (or welds) to the inside of the enclosure door. The door rods are secured using a steel roller pin which is adjustable up or down in the rod guide. The latching pressure against the gasket can be varied by moving the roller pin up or down from hole to hole in the rod guide.
NOTE: Two (2) Rod Guide Assemblies are required for each Three Point Latch Kit. If entire kit is not needed, you may order by individual part numbers shown below.
| Product No. | Material | Finish |
| NH-40511 | Steel | Yellow Plate |
| NH-40511C | Steel | Clear Plate |
| NH-40512 | 304 Stainless Steel | Bright |
| Product No. | Name | Material | Finish | Qty |
| FS-203000 | Hex Nut | 10/32 Steel | Yellow Plate | 2 |
| FS-203000C | Hex Nut | 10/32 Steel | Clear Plate | 2 |
| NH-20511 | Door Rod Guide | Steel | Yellow Plate | 1 |
| NH-20511C | Door Rod Guide | Steel | Clear Plate | 1 |
| FS-635409 | Pin | 1/4" Steel | Yellow Plate | 1 |
| FS-635409C | Pin | 1/4" Steel | Clear Plate | 1 |
| FS-735003 | Pin Retaining Ring | 1/4" Steel | Yellow Plate | 2 |
| FS-383000 | Washer | #10 x .30 Sealing Nylon | Clear Plate | 2 |
| FS-133100 | Screw | 10-31 x 1/2 Steel | Yellow Plate | 2 |
| FS-103100 | Screw | 10-31 x 1/2 Stainless Steel | Bright | 2 |
