Application
For use on most standard TYPE 4 and TYPE 12 enclosures to hold the door in an open position at 90 degrees while working inside the enclosure.
For use on most standard TYPE 4 and TYPE 12 enclosures to hold the door in an open position at 90 degrees while working inside the enclosure.
The FabTech Supply designed 90 Degree Door Stop Kit can be mounted on the top or the bottom of the enclosure opening. The door stop has a tapered bolt that will lock the door open at 90 degrees. When the door is closed, the door stop retracts to an out of the way position. To operate properly, the door must open horizontally and the width of the enclosure must be 16 inches or more. Installation can be made in the shop by using the spot weld mounting bracket or in the field utilizing the screw on mounting bracket. Part ordered as Spot Weld Installation or Field Installed. Hardware for installation, bolts, nuts and sealing washers, included for in field installation.
These kits are individually packaged in poly bags. They are generically labeled for use without remarking or can be brand labeled if desired.
| Product No. | Material | Finish | Notes |
| NH-45012 | 304 Stainless Steel | Bright | Field Mounted Bracket |
| NH-45012SW | 304 Stainless Steel | Bright | Spot Weld Bracket |